More information, please contact Wehaya at +60-3-5121 2300

Click Here for Website Link:
https://www.sick.com/sg/en/c/PRODUCT_ROOT

More information, please contact Wehaya at +60-3-5121 2300

Click Here for Website Link:
https://www.testo.com/en-MY/company/highlights

SOLA II Sulfur Online Analyzer

Perform total sulfur analysis on liquid hydrocarbon fuel process streams with the Thermo Scientific™ SOLA II Sulfur Online Analyzer. This proven field sulfur analyzer addresses the need for a low-maintenance total sulfur analysis instrument that can reliably measure low ppm levels to help customers meet the tightening, Tier 3, regulatory requirements that limit sulfur levels in fuels. The SOLA II uses the low-maintenance pulsed ultraviolet fluorescence (PUVF) detector with the proven Pyrolysis system for measuring total sulfur content in gasoline, diesel, kerosene, and jet fuel.

Sarasota Gas Density Meters--FD900, ID900 and PD900(Thermo Scientific™)

Reliably measure density or density related variables in the oil and gas, petrochemical and power industries with Thermo Scientific™ Sarasota Gas Density Meters. These meters offer near real-time control signal availability and ensure plant efficiency and vitality.

Sarasota RTR900 Instrument Retractor(Thermo Scientific™)

Use the Thermo Scientific™ Sarasota RTR900 Instrument Retractor with the Thermo Scientific™ Sarasota ID900 gas density meter in high-pressure measurement applications. This screw jack allows insertion and removal of the ID900 under operational line conditions, allowing measurement at true process conditions. The integral seal-housing allows for a wide operating temperature span and high-pressure capabilities.

Sarasota Liquid Density Meters--FD910 and FD950 (Thermo Scientific™)

Measure density or density-related variables with Thermo Scientific™ Sarasota Liquid Density Meters--FD910 and FD950*. These meters are for use within the oil and gas, petrochemical, chemical, food and beverage, and general process industries.
*Please note: The FD960 has been discontinued although we continue to provide services and support for this product.

Portable Flowmeters

Discover FLEXIM's range of portable liquid, gas and thermal energy flowmeters

Permanent Flowmeters and Process Analyzers

Discover FLEXIM's range of the FLUXUS liquid, gas and thermal energy meters as well as the PIOX process analysers

More information, please contact Wehaya at +60-3-5121 2300

Click Here for Website Link:
https://www.flexim.com/en

Measuring Techniques for Continues Level Measurement

In continuous level measurement , the level of a medium in a tank or silo is detected with the help of different measuring methods and converted into an electronic signal. The level signal is either displayed directly on site or incorporated into a process control or management system
Typical applications for continuous level measurement are process tanks, storage tanks or silos in the process industry.

The measured media are :
Liquids
Pastes
Powders
Bulk solids

Measuring Techniques for Point Level Detection

In point level detection, a point level switch detects when a certain predefined level is reached. Such a device is employed when it is not necessary to measure every possible intermediate level, as it is the case with continuous level measurement.

Typical applications for level switches are :
minimum or maximum detection
leak detection
overfill protection

In process tanks, storage tanks, silos and pipelines.

Measuring Principles for Pressure Measurement

Pressure measuring techniques can be used to measure not only process or differential pressure, but also level. volume, density or mass flow in all areas of process technology. The measuring ranges of pressure transmitters start at a few mbar and extend to extreme pressure ip to 1000 bar. Different measuring cells are used in these pressure instruments.

The measured media are :
Gases
Vapours
Liquids

Instrument and Software for Signal Processing and Snesor Adjustment

Industrial processes are highly automated nowadays. To ensure smooth operation, measuring instruments are employed to deliver a steady flow of up-to-date, objective information about the process tot the control technology. Various hardware components as well as signal conditioning software process and integrate the measurement data. .

They convert analogue or digital signals from the measuring instruments into information, i.e. measured values that are displayed on indicating instruments or fed directly into the control system.

Reliable, Repeatable,
High Performance
TRICOR Coriolis Mass Flow Meters

Accurate Measurement
of different liquids
Gear Flow Meters(ZHM)

Level Measument, Continuous Level

Our level measuring gaguges are used to monitor measuring ranges, ranging from a few milimeters up to several dozen meters. The radiometric level measurements work non-contacting and non-intrusive. As the components are mounted on the outer wall, they do not come into contact with the measured material and are therefore not exposed to wear and tear. The level transmitters are universally applicable on all kind of vessels, reactors, autoclaves or bunkers.

Density Measurement

Based on the radiometric principle, our level gauges are reliably operated under extreme conditions. The measurement is carried out irrespective of the material temperature, pressures or chemical properties of the measured material. Interior installations such as agitators etc. dont affect the measurement performance.


Our density measuring systems work absolutely non-contacting and non-intrutive. The density measurement can be carried out on all liquids and bulk materials, including highly acidic, alkali or saline solutions and suspensions. Clamped on the outer wall of the pipeline, chute or vessel the system components do not come into contact with the measuerd material and are therefore not exposed to wear and tear. You will get process insight from the outside. All our densitometers provide a maintenace-free operation and can be easily installed on existing pipelines without process down time. The density systems are adaptable to all pipelines from 25 to 1000mm.

Measuring Principle

Based on the radiometric principle, our density gauges can be operated in the most demanding and hostile of process conditions..


The Berthold moisture analyzers are used to measure the moisture in bulk materials such as
coal
sand
wood chips and pellets
clay
fertilizer
phosphate
gypsum
cereals
bagasse



The moisture measurement is carried out online during the ongoing process, providing rapid and precise real-time information on the current water content. The measurement is performed absolutely non-contacting , which lays the foundation for a long-term operation , free of wear and maintenance.

The Microwave Transmission and the Radiometric Technolgy are the two main principles on which our analyzers are based. Both technologies complement each other perfectly so that we are able to provide you with the best solution- even for the most challenging measurement tasks.


Concentration Measurement

We measure dry substance, brix value, concentration and water content, using the latest microwave transmission technology The measurement is carried out during the ongoing process, providing real-time information about the trends in concentration or dry substance The systems are proven to work highly accurate and reliable - for various liquids as well as pastes and suspensions.

We provide sensor systems for the installation on :

Vessels
Chutes
Pipelines

CONTROL VALVES - Series E Globe Valves

Available sizes in the Series ED & ET Globe Valves: 1, 1½, 2, 2½, 3, 4, 6 and 8 inch
Available sizes in the Series EZ Globe Valve: 1, 1-1/2, and 2 inch
The CVS Series E is a single port globe-style body with composition or metal seats and a balanced “push-down-to-close” valve plug.

There are three styles of valves available:

  • Design “CVS ED” is intended for general control application over a wide variety of temperature and pressure drops.
  • Design “CVS ET” is intended for applications requiring low leakage rates with composition seating (TFE) for tight shutoff requirements or metal-to-metal seating for higher temperature capabilities. The valve plug has a two-piece upper seal.
  • Design "CVS EZ" valves are globe-style with integral end connections, post guiding, and quick-change trim. These valves are used in chemical or hydrocarbon processing applications or in applications that require control of non-lubricating, viscous, or other hard-to-handle fluids.

*Flow Characteristics are Equal percentage, quick opening

The flow direction for standard cages ("CVS ED & CVS ET") is flow down, and the flow direction for the CVS EZ is up through the seat ring with the following flow characteristics available: linear, quick opening, and equal percent.

The end connections are ANSI Class 150, 300 and 600 Raised Face or Ring Type joint flanges as per ASME B16.34-1996.
Valve bodies are available in LCC, WCB and 316sst material.
CVS Controls manufactures Control Valves and associated instrumentation products to specification that facilitate the direct replacement with FISHER* process control equipment.

More information, please contact Wehaya at +60-3-5121 2300

Click Here for Website Link:
http://www.cvs-controls.com/products/control-series-E.html

Rupture Discs & BPRVs

Rupture Disc Plugs(OEM)

Explosion Vents

Tank Protection

Accessories & Detection